Used Machines

In Stock and Used Machines Currently Available

MONTAGE of IMAGES

CONTACT:
Ann Rowland - International Sales Manager
Phone 330-920-9200 Ext. 135
E-Mail: arowland@ferryindustries.com

Used REINHARDT Rocking Oven Rotational Molding Machine

Available for immediate possession.

This rocking oven machine was built in 1980 by Ernst Reinhardt GmbH.

General Stats
52" diameter x 170.5" long swing (1320 mm diameter x 4330 mm)
Burner - Kuppersbusch
1,890,500 BTU Burner (300 Mcal)
The pit size needs to be:
311" x 138 1/2" x 8' 1/2" deep. (7900 mm x 3520 mm x 2590 mm deep)
Overall outside dimensions:
280" long and 67" high from the floor. (7115 mm L and 1700 mm high from the floor)

ELECTRICAL SERVICE: 480 VAC, 3-phase, 60 Hz.
FUEL: Natural Gas

Price (USD):
$70,000

NEW QUINTAX 3-AXIS EXPRESS ROUTER

Available for immediate delivery.

Brand new QUINTAX 3-axis Express Router

General Stats
5' x 10' Vacuum Table
4.7" Z-axis Stroke
5 HP, 18,000 RPM Manual Collet Spindle
PC -based control complete with ArtCAM software

Price (USD):
$46,500

NEW FEMCO Model B-300 Vertical Band Saw

Available for Immediate Delivery.

Brand new manual vertical band saw that is a must in every foam fabricator.

General Stats
- 30" High Fence
- 60" Cut Height
- 54" Outside Table
- 60" Throat
- 3 HP Blade Drive Motor
- Adjustable Blade Guide (60" - 2")
- Broken Blade Detector
- Flashing Red Safety Light
- One V-tooth Blade

ELECTRICAL SERVICE: 230 VAC, 3-phase, 60 Hz.

Price (USD):
$ 22,500

FERRY Rotospeed Model RS3-200 Turret Rotational Molding Machine

Available for immediate sale.

This used FERRY RS3-200 Turret was manufactured in 1997. Photos are available.

General Stats
• Fixed turret model
• Three straight arms, each with dual passage internal air
• Swing diameter 88” x 78”
• Weight capacity 1,500 lbs per straight arm
• Clutches on minor axis drives
• Variable frequency AC inverter drives for gear-motors
• Oven with 2.15 MBTU/hr burner capacity
• Cooling chamber
• Chart recorder
• Ferry RotoCure 2.0 control system—GE 90/30PLC

Price (USD):
$140,000

FERRY RotoSpeed Model RS4-4600 (RS4-430) Independent-Arm Style Rotational Molding Machine

Available for immediate sale.

This used FERRY RotoSpeed machine was built in 2004.

General Stats
• Five-station, independent arm style machine
• 4 straight arms with single passage internal air
• Swing capacity 181” x 165”
• Weight capacity 5000 lbs per straight arm
• Variable-frequency inverter drives for gear-motors
• Oven with 5.6 MBTU/hr burner capacity
• Complete with cooling chamber
• Chart recorder
• Ferry RotoCure 2000 control system—Allen Bradley SLC 500 PLC
• Package includes spiders & customer-manufactured platform

Price (USD):
$320,000 (includes spiders & platform)

USED Rocking Oven Rotational Molding Machine

Available for immediate sale.

This rocking oven machine was build around 1996 by an unknown manufacturer.

General Stats
• 234” (5.94 m) length
• Diameter: 42” (1.07 m)
• Eclipse burner with 800,000 BTU/HR
• Allen Bradley PLC controls
• Photos available

Price (USD):
$ 58,000

FSP Model M-80 ATI Turret Rotational Molding Machine

Available for immediate sale.

This used FSP M-80 ATI Turret machine was built in 1991.

General Stats
Three straight arms
Swing capacity 96” (2438 mm)
Arm weight capacity: 2000 lbs (909 kg) per arm
Complete oven
Cooling chamber with doors
Photos available
Buyer to remove from premises

Price (USD):
As is, $78,000

FERRY RotoSpeed Model RS4-3700 HD Independent-arm Style Rotational Molding Machine

Available for immediate acquisition.

This robust machine, built in 2008, is equipped with four L-shaped offset arms and is a true workhorse.

General Stats
• 145" x 131" (3680 x 3325 mm)swing in the oven
• 4,000 lb (1818 kg) weight capacity on each offset arm
• Arm orientation on all 4 arms
• Multi-shot software program
• Intermediate station fans
• Cooler plenum
• Cooling chamber doors
• RotoCure 2000 System Manager
• InfraRed Thermometry (IRT)

Price (USD):

Used FSP M-80 PC Clamshell Rotational Molding Machine

Available for immediate possession.

This used FSP M-80PC clamshell machine was built in 1995 by FSP. Current owner has made several improvements since purchasing it in 2005 and has not used water in the cooling cycle.

The machine is in excellent condition and can be seen in operation.

Photos are available upon request.

General Stats
Single-station machine.
Equipped with one straight arm.
Full 94" (2385 mm) spherical swing.
2,000 lb (909 kg) weight capacity.
New APX line burner - 2006.
Exhaust fan has been upgraded.
Worn hydraulic hoses have been replaced.
Very clean interior with no plastic spill
0-525F in 4 minutes.
Circular mold mount spiders are included.
PC included.
Transformers included.
Manual with electrical diagram included.

NOTE: There is an opportunity to purchase the complete rotomolded planter business with molds; please contact us for further information.

Electrical Service: 575 VAC with transformer to 440 VAC, 3-phase, 60 Hz.
Fuel: Natural Gas, 1 PSI

Price (USD):
$50,000

FSP M-20 Laboratory Clamshell Rotational Molding Machine

Machine available for immediate possession.

This used FSP M-20 was built in 1993.

Photos are available upon request.

General Stats
- One straight arm
- Single-station machine that includes a combination oven/cooler.
- Full 30" (760 mm) spherical swing.
300 lb (136 kg) weight capacity on the straight arm.
- Single-passage inner air.
- Maximum operating temperature 750 F (400 C).
- Air & Water mist cooling.
-Oven roof is pneumatically controlled.
- Control features a Processor with RotoScan programming.

Machine sold As is, Where is, Stow, OH.

No warranty.

ELECTRICAL SERVICE: 230 VAC/3-PH/60 HZ.
FUEL: Natural Gas

Price (USD):
$40,000, Ex-works, Stow, OH USA

Ferry Industries, Inc.
World Headquarters:
4445 Allen Road
Stow, Ohio 44224-1093 USA